Tag Archives: Metal recycling

Getting The Most Cash At The Scrap Yard

Houston, TX, USA, 2019-Aug-16 — /EPR INDUSTRIAL NEWS/ — You are probably looking for a scrap yard nearby and got to this page, please click the below link if you searched for a scrap yard near me and need a nearby recycling company. Local scrap yards

Scrap Yards Nearby

Scrap yards are local metal recycling centers, they purchase metals including iron, stainless steel, brass, copper, aluminum & lead.

They will also buy electronics, appliances or cars to dismantle them and sell the steel mill or larger scrap brokers. If you would like to learn how metal is recycled view our article How scrap metal is recycled to learn more.

The metal that scrap yards generate will get melted and reused, that being the case they are a must for our environment.

Here are some tips that will help you to get the most cash from your metal when recycling:

1. Research.

Knowledge is power, and this is the case even at the scrap yard.

Whatever kind of metal you are going to sell will need to be graded by the scrap yard.

As an example, insulated copper wire or any other copper will be (#1 or #2) depending on a combination of the gauge of copper, insulation type, copper coatings including tin, silver & shellac.

If you have scraps such as plate, sheet or any other for it will depend on if the copper is painted or has other metals attached to it.

#1 copper that has no insulation or coating will always be worth more than #2 copper, that’s why you need to know what you have before you call or go to the scrap yard.

2. More is better.

Bringing larger amounts of weight to the scrap yard will give you more negotiating power.

So figure you have a huge amount of aluminum, the scrap yard is going to really want your business more than they would from someone bringing in a small pick up load.

Local recycling centers make their profit by the ton working on any where from $50 to $400 depending on how much they have to invest in the metal.

By gathering a large amount of weight you maybe able to get $100 more on a ton of your scrap then if it was 500 lbs. and 4 trips to the yard not to mention you save on fuel, also keep in mind that when at a yard there is a 50/50 chance of getting a flat so unless you have $500-$600 or more worth of scrap metal its just not worth it.

3. Separate Your Scrap Metal.

Prior to going to the scrap yard, separate all your metal.

By doing this you will get better scrap metal prices which is an important key to getting the most money for your scrap.

Via EPR Network
More Industrial press releases

How is scrap metal recycled

  • Metal Recycling How Scrap Metal Is Recycled
  • Scrap metal recycling is one of the largest industries in the Country
  • For the original post please visit How Scrap Metal Is Recycled

Dallas, TX, USA, 2019-Aug-01 — /EPR INDUSTRIAL NEWS/ — Metal Recycling is the process of reusing old scrap metal to manufacture or fabricate another item, this can be done over and over again with the same metal that was once used in a bridge 100 years ago can be the same metal that is now used in the car your driving today.

Video courtesy of The Discovery Channel

 

Types Of Scrap Metal:

There are many different types of scrap metal you will encounter in the metal recycling process.

Typical metals include iron, aluminum, brass, copper & stainless steel, of these scrap metals copper is the most sought after and is part of scrap metals classified as non ferrous, non ferrous meaning no iron or minimal iron present and non magnetic “Iron is magnetic”, non ferrous metals include copper, brass and aluminum.

Where these metals can be found:

  • Iron can be found in most anything including cars, heavy machinery, structural steel & more.
  • Aluminum can be found in Aircraft frames and parts, automobile engines, heads and transmissions, commercial window frames and window frames.
  • Brass can be found in water meters, ammunitions, fixtures, faucets and plumbing supplies.
  • Copper can be found in washing machines, automobiles “engine harness, alternators & starters, electrical equipment, electric motors and transformers.
  • Stainless steel can be found in the food and restaurant industry prep stations, chemical plants for storage of chemicals and many other products.

The Scrap Yard:

Once the metal is gathered it will find it’s way to the local metal recycling center “Scrap yard” where the metal will be unloaded usually using a crane with a magnet or hydraulic grapple attachment, smaller pieces of scrap metal can be unloaded by hand. It will then be separated and then shredded, torched or made into smaller pieces by any other means necessary.

The scrap will then be separated into different piles and non ferrous metals will be further separated into various categories.

The Steel Mill:

When ready the scrap metal will be loaded onto trucks that will haul it off to it’s final destination, “the steel mill” or aluminum foundry etc. where the metal will be recycled and melted into new iron/steel plates, blocks, beams etc. the metal is melted by high voltage electrodes, flux and other chemicals maybe added to purify/clean the metal, pressurized air may also introduced to help achieve high carbon steel which is much stronger than cast iron.
Other metals maybe introduced in very small amounts as well such as nickel, chrome or molybdenum to make an even stronger high strength steel such as chrome moly steel or 4140 steel.

Via EPR Network
More Industrial press releases