Category Archives: Parts

Study: Europe automotive headliners market revenues to witness a 7.5% CAGR through 2026

DUBLIN 2, Ireland, 16-Oct-2018 — /EPR INDUSTRIAL NEWS/ — The broader disruption in the automotive sector is rubbing off on the Europe automotive headliners market, as vehicle interior air quality (VIAQ) adds to the litany of factors that influence buyer behavior. The growing consumer emphasis on interior air quality isn’t lost on component suppliers and OEMs. Incorporation of low-VOC materials and modular designs is gaining ground in the US$ 6.5 million Europe automotive headliners market, according to Fact.MR’s new study.

The Fact.MR study maintains an optimistic long-term outlook on the automotive headliners market in Europe. The study projects revenues to witness a 7.5% CAGR through 2026, with Western Europe at the forefront of sales and innovation. The lucrativeness of Europe’s automotive headliners market is likely to create a fair share of opportunities, as well as challenges for OEMs and component suppliers in the region.

Request a Sample 

https://www.factmr.com/connectus/sample?flag=S&rep_id=414

Europe’s preeminence in the global automotive landscape is not limited to high production and exports alone – the region leads the way for enacting stringent emission regulations and their implementation. “Automotive headliner manufacturers can expect institutions like ACEA and VDA to focus inward, leading to stringency in VIAQ regulations,” says Nandini Roy Choudhury, Senior Consultant at Fact.MR. “Considering the fact that Europe exports a sizable number of vehicles to Asia Pacific, where most of the action is taking place, European OEMs and aftermarket suppliers also need to comply with the domestic regulations, such as the Guobiao and JAMA,” adds Ms. Roy

Growing Adoption of Low-VOC Materials in Manufacturing Automotive Headliners 

According to Fact.MR’s study, a combination of global and region-specific factors will influence Europe’s automotive OEMs and aftermarket players to invest in low-VOC components. The transition of headliners from a simple covering to an integrated platform for vehicle peripherals has created the need for design innovation. The challenge to improve VIAQ has also led to experimentation with new materials, ranging from thermosets to water-based adhesives.

Know the methodology behind the report

https://www.factmr.com/connectus/sample?flag=RM&rep_id=414

“The evolving consumer demand is multipronged – it is not going to impact only a specific set of players in the supply chain, but its effects are being felt across the spectrum. Unwavering focus on cabin air quality is driving adhesive companies to innovate, bringing recyclable and biodegradable raw materials to the forefront,” adds Ms. Roy.

Germany leads the Europe automotive headliners market, accounting for over one-fourth revenue share in 2017.

Players in Germany’s automotive headliner supply chain are reliant on the broader prospects of the automotive landscape, which has been encouraging in the last couple of years.

According to Germany’s Federal Motor Authority (KBA), Germany’s new car sales reached 3.44 million in 2017, witnessing an increase of 2.7% over the previous year. German headliner and adhesive manufacturers were also supported by positive momentum in Asia Pacific, where new car sales have created significant opportunities. “Germany is not only the leading production and sales market in Europe, but also a key exporter of cars and LCVs. We can expect Germany to take the lead in this new era of flexible, sustainable, and cost-effective headliners and other interior components,” opines Ms. Roy.

The European automotive headliner market may well be dominated by Germany, but France and UKclosely follow suit. The strength of the triumvirate can be gauged from the fact that these three markets collectively held a revenue share of over 65% in 2017. Automotive headliner sales in these three top markets are driven by encouraging sales in compact and mid-sized cars.

The design innovation and incorporation of new materials in headliners and interior parts manufacturing is likely to remain concentrated in the OEM landscape. “Aftermarket sales account for less than 30% share of the European automotive headliner market, so the onus is on OEMs to take the lead,” concludes Ms. Roy.

The report is available for direct purchase at  

https://www.factmr.com/checkout/414/S

SOURCE: EuropaWire

Windings Inc Celebrates Five Years of Employee Ownership

Windings Inc; manufacturer of coil windings and custom and specialty motors and generators has been in business as a 100% employee owned company for over five years now. The anniversary date was December 31, 2013 but due to the busyness of the holiday season the company recently celebrated in February.

Being 100% ESOP, (Employee Stock Ownership Plan), has brought many positive changes to the Windings Inc. Culture and also to the growth of the business. Jerry Kauffman, President and CEO of Windings Inc, had this to say about the Employee Owners, “There is a great pride of ownership among our EO’s and an added level of engagement. They want to understand how the business works and they want to know how the business is doing. The intrinsic motivation makes an easy connection between the importance of the work put out by the EO’s; why it is important to them, and why it is important to the company.”

This genuine motivation does not go unnoticed by visitors of Windings Inc either. Customers routinely comment on the culture, and how the EO’s talk to them. They also mention that the employee owners are very knowledgeable and offer ideas on projects. It is evident to visitors and customers of Windings Inc that the employee owners enjoy their work and how they can contribute to their customers’ success.

Windings Inc. vision is to “grow the value of the enterprise while being remarkable”. The quality found in the stators, rotors, and motor/generators builds are the highest they can be because of the workmanship that goes into each unit. This hand craftsmanship also brings affordable pricing to the customer.

Via EPR Network
More Industrial press releases

Lamp Post Extracts The Different Extractor Fan Options

Lamp Post Electrical have built a business supplying a range of good electrical equipment via the Internet at highly competitive prices. The range of their equipment lists is large and varied and represents the best options available for the standard electrical engineer. In the field of electrical extractor fans Lamp Post Electrical is pleased to be able to offer a selection of options, which can be chosen according to the application to which it is intended. In particular the Lamp Post Electrical company have a great range of Manrose bathroom extractor fans specially designed and built for bathroom, cloakroom and toilet use. These fans are all quiet in operation and are virtually silent to the rest of the room, if they make a noise there is something wrong with them.

Lamp Post are pleased to offer the Manrose XF 100PIR Extractor Fan specially built for bathrooms and toilets, this fan will operate on the entry of a person into the room and extract successfully until a fixed time after the exit of the person when a timer will automatically run for a fixed time after the persons exit. This will keep the bathroom extractor fan generally clean and dry and remove all uncomfortable smells as well as the steam from showers or baths. The only problem that the system may have is if copious amounts of wet washing are dried in the bathroom and the fan requires operating to remove the dampness, as the P I R system will have shut the system down long ago.

The Manrose WF 100mm Window Fan with Pullcord is a standard for Lamp Post Electrical as it is a basic fan which fits into the glass in the window where a hole has been cut and the extractor has been fitted. Extraction is simple and correct and the fan is turned on and off by means of a pullcord, this is a positive system that is cheap to install and will work effectively when power is turned on but is reliant on the power being turned on and off manually. Lamp Post realise this is a great extraction fan for use when problems occur and where manual operation is a sensible and secure way of removing the extraction problems. It is no use having a P I R system if the fan shuts down and leaves the problem unresolved.

The Manrose 4 inch Extractor fan with Humidstat – It is a great workhorse fan which can be fitted into the bathroom walls or ceiling so that the gases are extracted through a ducting to the outside of the building. The system works well and the built in Humidistat will keep the fan running when there is a humidity problem and just keep the fan going if a problem is detected.

Lamp Post – http://www.lamppostelectrical.co.uk – is pleased with these options and each has its place as well as the low voltage extractor fan systems, which are now also coming into serious contention in the market place. However Lamp Post Electrical has stocked each system because there are personal choices that people wish to make and each of the systems will work better in a certain environments than some of the others.

Via EPR Network
More Industrial press releases

DeBurring on Same Machining Center Horizontal (HMC) & Vertical (VMC) in Few Seconds with Flow Through Holders & Brushes

A newly developed DeBurring system on a user’s same machining center to withstand against the present scenario and market situation; IMEXSU can try to help a little bit to survive in this tough situation by:

* Cutting cost per components
* Improving quality
* Reducing delivery time.
* Reducing manpower
* Giving consistency

In this time of financial crisis, DeBurring Brushes & Holders brings cost-effective and appropriate solutions for DeBurring, Micro DeBurring, Surface Preparation and Radiusing needs on same Machining Center like VMC / HMC machines on both metal and non-metal.

Presently, DeBurring Brushes & Holders is more focused on catering solutions to every DeBurring problem faced during machining. In today’s very fast, most modern and intelligent machines, productivity has increased in multiplications beyond limits, as a result free availability of Burr on most operations.

To overcome this problem in the shortest possible time is the need of the hour, as time is money.

It is the right time to think of introducing a few new things to a present Machining system, which will save a lot of time and hard-earned money; it’s time to contact a DeBurring Solution provider, IMEXSU, which has been one since 1976.

The range of MID (Machine in-line DeBurring) is unique, and that’s tomorrow’s need, but IMEXSU is ready to offer today. This is just few form wide range.

IMEXSU offers standard holders to be fitted directly to present holders like BT, ISO, HSK and others, with shank sizes Diameter 12, 16, 20, 25, 32 & 40mm with or without side-lock to be directly fitted to holder with help of Collete, Hydro-grip, Shrink-fit, Side-locks. With water flow through. http://www.de-burring.com [DeBurring Directly on Machining Center]

The brushes are available from Diameter 50, 60, 80, 100, 125, 160, 165, 180, 200, 225, 250 & 296 and many more.

Brushes from Dia. 100 and above are also available in water flow through.

Grit available from 46 to 1000 more, and types are Diamond, Ceramic, Silicon, Aluminum, etc.

IMEXSU has more then 76 types of DeBurring products to suit every individual’s needs.

Via EPR Network
More 
Industrial press releases

CNC-Shopping – FUJI ELECTRIC Transistors & Fanuc Transistors at low prices

Cnc-shopping.co.uk, International leader for the supply of CNC spares parts on-line, remains the biggest provider of the major brands available on the CNC Spares parts market, such as FUJI ELECTRIC, FANUC, TOSHIBA and much more. We offer you an important stock of first hand parts, brand new at a very low price. Our products are systematically tested by our technicians, and in order to certify you its good quality, a warranty is also provided.

Cnc-shopping acquired a reputation in the industrial sector thanks to its qualified technicians and its individualized follow up adapted to each client. Furthermore, we are aware that the replacement of parts must be done at short notice, and that is why we guarantee you an immediate availability of our team to answer your demand, with the possibility to choose an EXPRESS Method within 24 hours or an Economic deliverycharge at competitive prices.

We own a massive stock of specific parts, like Transistor modules, power block, FUJI power blocks, FUJI ELECTRIC modules, FUJI electric power transistors, FANUC transistors used mostly in the Industry and Electronic Engineering sectors, which are essential to the use of FANUC Servo drives, FANUC Spindle drives, FUJI Servo drives, Drives unit. Their functioning is necessary to the efficiency of your production, then we know that their availability is crucial, for that reason, we are one of the few to indicate you the STOCK AVAILABILITY in real time.

The types products IGBT, FANUC A50L, EVK, ETK, ETG, 1DI, 2DI, 6DI, 2MBP, 6MBP, 7MBP and more clearly the references : A50L-0001-0096 / EVK71 050, A50L-0001-0109 / EVL32-060, A50L-0001-0125 / 6DI50A-060, A50L-0001-0175 / 6DI120C-060, A50L-0001-0178 / 6DI85A-060, A50L-0001-0274 / 7MBP150RA060-01, A50L-0001-0291 / 6MBP100RD060, A50L-0001-0209 /6DI150A-060, have allowed Cnc-shopping to be the only supplier to propose you a solution for any kind of malfunction on a transistor.

Cnc-shopping, knew how to keep its rank in the global industry, and your confidence helped us to gain experience and develop, to be able to answer your wants and prove you day after day, that by choosing Cnc-shopping, you have made the right choice.

To discover the offers regarding the FUJI ELECTRIC transistors, visit our web-site www.cnc-shopping.co.uk.

Via EPR Network
More Industrial press releases

Welcome to EPR Industrial News

EPR Industrial News is a new blog, part of EPR Network, that is going to be focused on and will be covering the industrial news and stories from press releases published on EPR Network.

EPR Network (EPR stands for express press release) is one of the nation’s largest press release distribution networks on Web. The EPR’s nationwide network includes 12 State based PR sites, one major PR forum and a number of industry specific PR blogs and what started as a hobby on Internet years ago turned out to be a rapidly growing business today. EPR Network is also known as one of the most trusted (human optimized, published, edited and monitored, spam/scam/low quality PR content free) PR sites on the web with more than 10,000 company and individual press releases distributed per month. EPR Network is putting your press releases on top of all major search engines’ results and is reaching thousands of individuals, companies, PR specialists, media professionals, bloggers and journalists every day.

EPR Network has thousands of clients around the world including global 500 corporations like Hilton Hotels, Barclays Bank, AXA Insurance, Tesco UK, eBay/Skype, Emirates, just to name a few. The network’s PR web sites are currently reaching from 150,000 to sometimes 500,000 unique visitors per month while our viral reach could possibly go to as much as 1M people per month through our presence across various social media sites. EPR Network was established in 2004 and as of May 2008 it had more than 800,000 press releases (pages) published on its network.

If you have a press release to be distributed, you can do it over here: press release distribution