Category Archives: Computers

Z3 Technology introduces 4K H.265 IP camera for broadcast, industrial, medical, security and corporate applications

z3cam-4k-product-image_europawire

LINCOLN, NE, 10-Sep-2016 — /EPR INDUSTRIAL NEWS/ — Z3 Technology, LLC, a leading provider of embedded video compression systems, and Sony Electronics Inc., an international leader in image sensors camera technology, are announcing the availability the Z3Cam-4KTM, a 4K H.265 IP camera leveraging Sony’s FCB-ER8300 4K camera. The Z3Cam-4K brings clarity and detail to high movement and low light conditions with optimized 4K technology. This unit captures stunning video with 20x optical zoom with integrated auto focus. The Z3Cam-4K provides crystal clear images for broadcast, industrial, medical, security and corporate applications while adding the ability to broadcast and analyze your video around the world.

The Z3Cam-4K is the first 4K video system capable of encoding and streaming 4K H.265/HEVC video with ONVIF integration for easy camera management. The innovative Z3Cam-4K has multiple options for your IP transmission. The system can output both H.265/HEVC and H.264 video over IP in 4K resolutions. It can also send a simultaneous HD stream. Camera control can take place remotely with VISCA control commands sent over IP to the Z3Cam-4K from a comm port on your PC. Where seeing sharp lines is key, Sony’s 4K noise reduction algorithm provides the highest quality imaging fit for virtual reality imaging and high detail data analytics.

“Sony is privileged to work with Z3 on providing the 4K optics and image capture subsystem integrated into the Z3Cam-4K. With fast auto focus, 20x optical zoom and electronic image stabilization we expect this new camera to be deployed widely in demanding commercial and industrial 4K applications,” said John Monti, Director, Sony Visual Imaging Solutions.

“The Z3Cam-4K camera provides high quality, low bit rate video to be streamed over IP networks at 4K resolutions,” Aaron Caldwell, CEO Z3 Technology said. “In the past the bandwidth requirements for 4K were too high for many of our customers to make the switch to 4K. The Z3Cam-4K solves this dilemma by taking advantage of state of the art H.265 compression technology that uses very low power and low bandwidth. Z3 is excited to be collaborating with Sony to offer the industry this 4K H.265 IP camera solution to allow 4K imaging to be sent around the world with no distance limitations.”

Z3Cam-4K Features:
H.265/HEVC and H.264 encoded video
4K (Ultra-HD) and HD resolutions
High sensitivity image processor
20x optical and digital zoom
Integrated auto focus zoom and optional manual focus
Visibility enhancer ICR (Day and Night)
Noise reduction algorithm for high frequency and high detail areas
GigE interface for IP output
IP control and configuration
Supports Sony VISCA camera control over IP and ONVIF Profile S
Microphone input
Composite output
Device recording options via USB 2.0 interface
Network recording options over IP
PoE power or DC power

About Z3 Technology:
Z3 Technology is a Sony Authorized Integrator and is a leader in the embedded video market with focus on OEM ready system-on-modules and technology transfer licensing.

SOURCE: EuropaWire

More Industrial Press Releases & News from Europe.

Videofied Alarm System From Stanley For Rapid Response And Reduce False Alarms

Stanley Security Solutions has launched the Videofied® wireless intruder alarm system with integrated video, providing a low cost bridge between intruder alarms and CCTV systems.

Videofied is an event based alarm system featuring PIR intruder detectors with in-built cameras. When the PIR sensor is triggered, the onboard video camera is activated and instantly takes a ten second video clip of whatever has caused the detection. The video is immediately sent to the alarm monitoring station with the alarm signal, allowing the operator to see what has caused the alarm and enabling them to distinguish between a genuine intruder detection and a false alarm event.

Such an innovative design makes for a highly effective intruder alarm system as it identifies crimes in progress leading to a priority response and high apprehension rates, as well as helping to reduce false alarms – essential to guarantee police response.

Videofied is extremely cost-effective to purchase, install and monitor, especially when compared to the cost of most conventional CCTV systems. One of the key reasons for this is that Videofied is a totally wireless system. All aspects of the system, including the control panels and alarm devices, are battery operated (with two years life on a single set of batteries), and the communication back to the monitoring station is via a GPRS link from the panel. This means that a system can be set up in minutes with minimal disruption, installation time and cost.

Videofied incorporates both indoor and outdoor PIR cameras with built in IR illumination for day/night video capability, so is suited to an exceptionally wide range of environments, including temporary and rapid response applications, such as construction sites, vacant properties, utilities and transport infrastructure, where speed and ease of installation are an important consideration. Videofied is also particularly suited to applications where false alarms are costly or where police response is in danger of being withdrawn without a system upgrade.

Videofied includes all of the peripherals that you would expect from a standard alarm system, including conventional PIRs, sirens, door contacts, and smoke detectors. In total up to 24 motion viewers (including PIR cameras) can be integrated with one control panel for a cost-effective system.

Although relatively new to the UK, the Videofied system has been successfully deployed in over 185,000 installations across 35 countries.

For sales information please contact Stanley Security Solutions at 0844 2540032 or via www.stanleysecuritysolutions.co.uk.

Via EPR Network
More Industrial press releases

Logistics Company Employs Stanley Access Control Solutions

Stanley Security Solutions has completed the installation of an integrated electronic entry system for logistics company Mini Clipper at its new premises in Bedfordshire.

Specialising in the delivery of palletised freight, Mini Clipper employs almost 100 people and operates a substantial fleet of vehicles. As part of an expansion programme, the company recently moved to a new, larger site providing the added opportunity to improve security and allow for a more effective means of monitoring and controlling staff and visitor movements.

A long standing customer of Stanley, Mini Clipper has employed its Time & Attendance solutions for over 15 years. An excellent working relationship has developed over that period, encouraging Mini Clipper to turn to Stanley for its security requirements at the new site, most notably a sophisticated site wide access control system capable of handling both pedestrians and vehicles.

Stanley was able to provide invaluable advice on developing the site from a vehicle entry point of view right from the outset, helping Mini Clipper to efficiently plan the site’s redevelopment.

Stanley has now installed its NT500 access control system integrated with the security gates and video door entry system site wide, as well as connecting to a remote location. The solution has provided Mini Clipper with the ability to control and monitor access to the site with a one fob / badge solution without restricting the flow of vehicles or staff.

The NT500 Access and Alarm Server, manufactured by Stanley, is an expandable controller that provides secure, high speed access. Security is in part attributed to the Secure Socket Communications and a built-in Firewall for ‘data centre grade’ protection. System downtime is negated through the use of Distributed Intelligent Controllers so that even if the main communication lines are lost, the on-site security is maintained at all times.

In addition to the access control, Stanley has also upgraded Mini Clipper’s Time and Attendance solutions system to its latest Astrow system. Astrow is used by Mini Clipper for managing payroll costs, allowing employees to clock remotely via a pc and request holidays, and helping the management team monitor operational costs.

Peter Masters, Managing Director of Mini Clipper, is pleased with the entry system solution at the new site: “We wanted access control throughout the new site and liked the convenience of having it directly linked to the electronic pay role, which Stanley has provided us for years. The access control is used across a large site and has proved to be robust. It keeps the unwanted out and protects the freight within, which our customers like very much.”

For sales information please contact Stanley Security Solutions on 0844 254 0032 or viawww.stanleysecuritysolutions.co.uk.

-Ends-

Editor’s Note – Corporate Information:
A division of Stanley Black & Decker (SWK), Stanley Convergent Security Solutions (CSS) is one of the leading security providers in the United Kingdom and around the world. Stanley CSS designs, installs, monitors and services security and commercial alarm systems for industrial, government, commercial, residential and national account customers. Stanley CSS represents a network of resources, state-of-the-art technology and a culture dedicated to excellence; where its employees have the training, the equipment and the processes they need to deliver the finest security solutions in the industry. Stanley CSS provides the best of both worlds, a local company with global resources and one of the most trusted names in security.

For more editorial information, please contact Julie Richards at Publicity Overload, 45 Station Road, North Harrow, Middx., HA2 7SU; Tel: 020 8427 2320; E-mail:julie@publicityoverload.co.uk. Please fax (020 8427 0264) or email (nila@publicityoverload.co.uk) all colour separation requests to Nila Jamil.

Via EPR Network
More Industrial press releases

Stanley Puts Dynamic Controls Back In Control With Sonitrol® Alarm Verification

Valve manufacturer Dynamic Controls has upgraded its security with Stanley Convergent Security Solutions (Stanley CSS) and moved to Sonitrol® alarm monitoring.

Dynamic Controls, based in Oldham, is a leading manufacturer of high and low pressure cartridge valves, manifolds, reducing stations and fluid/gas systems for critical, demanding applications, including submarines, aircraft carriers and navy surface ships.

A site manufacturing such critical equipment clearly needs round the clock protection. The existing intruder alarms system had come to the end of its life and Dynamic Controls was dissatisfied with the service it was receiving from its then supplier, as well as the rising costs. Dynamic Controls turned to Stanley CSS for a solution.

Stanley removed the elderly conventional intruder alarm system and replaced it with contemporary Sonitrol Audio Impact technology. When an alarm is triggered, the system immediately alerts Stanley’s ProtectionNet Customer Service Centre and transmits the sounds of the break-in attempt and a code describing the location of the activated audio sensor. Professional operators on duty around the clock listen silently to determine the nature of the noise and take appropriate action, such as calling the police or resetting the system.

The access control system installed by Stanley CSS at the Dynamic Control’s site is also run through the Sonitrol system for complete integration and ease of use.

Andrew Hill, Facilities Manager at Dynamic Controls, is impressed with both the equipment and the service he has received from Stanley: “the system is brilliant and it’s very simple to use. Stanley’s customer interface is fantastic – all the staff are polite and knowledgeable and are lovely to deal with. It’s nice to be treated as a human being!”

Sonitrol alarm monitoring is available exclusively in the UK from Stanley CSS. For sales information please contact Stanley CSS on 0844 254 0032 or via www.stanleycss.co.uk.

Via EPR Network
More Industrial press releases

Stanley Steps in to Provide Stearn Electric with Sonitrol Alarm Verification

Following the launch of its first European ProtectionNet Customer Service Centre in the UK, Stanley Convergent Security Solutions (Stanley CSS) has been awarded the Sonitrol alarm monitoring contract for two Stearn Electric distribution warehouses in the South of England.

A national electrical distributor supplying over 10,000 electrical wholesalers and outlets across the UK, Stearn Electric uses Advanced Audio Verification using Sonitrol Audio Impact technology at its Bristol and Leighton Buzzard branches. Having recently obtained exclusivity in the UK on the provision of Sonitrol, Stanley CSS was quick to react when Stearn Electric’s Bristol branch contacted the company to see if they could take over the system from the previous provider.

Stanley CSS put in place a strategy to take over the system rapidly, including sourcing a replacement board for the panel, supplying qualified engineers to undertake the work and programming Stanley’s ProtectionNet Customer Service Centre (PNC) system to receive the Sonitrol signals – all in one visit. Stearn Electric Bristol branch Manager Alan Blackwell is impressed with the service provided: “I have been very pleased with Stanley’s response and the manner in which they carried out the repair and takeover. The alternative would have been to install a new system at considerable expense and disruption, which I did not really want to do.”

In fact, so impressed has Alan been that he has recommended Stanley CSS to other Stearn branches, including Leighton Buzzard which has also appointed Stanley CSS to take over their Sonitrol alarm system shortly.

Sonitrol provides organisations with the ability to verify an alarm event in real time by allowing operators to hear what’s happening on a monitored site. When security alarm systems are triggered, the system immediately alerts Stanley’s PNC and transmits the sounds of the break-in attempt and a code describing the location of the activated audio sensor. Professional operators on duty around the clock listen silently to determine the nature of the noise and take appropriate action, such as calling the authorities or resetting the system. Such a facility increases apprehension rates as intruders are not alerted and police respond quickly to a verified crime in progress. False alarms can also be quickly identified.

Via EPR Network
More Industrial press releases

Stanley Takes Over Sonitrol Alarm Verification for Retailer

Having recently obtained exclusivity in the UK on the provision of Sonitrol, Stanley Convergent Security Solutions (Stanley CSS) has announced another significant contract for Sonitrol alarm monitoring, with Thames Cash and Carry Ltd.

An independent wholesaler based in Reading, Berkshire, Thames Cash and Carry serves a large number of customers across the south east of England. Its 30,000 square footage, 30 staff and extensive product lines make it one of the largest independent wholesalers in the area.

Thames Cash and Carry has long enjoyed the added protection that Advanced Audio Verification using Sonitrol Audio Impact technology brings, as owner Mr Singh explains: “with the old system we had lots of false alarms – ten or more over three months, which led to police support being withdrawn. With the Sonitrol system we’ve had no false alarms at all because all of our security alarms are now verified. We didn’t want to change from Sonitrol when the previous provider lost the contract, so we were very pleased for Stanley to take over the system.”

In fact just days after taking over the Sonitrol alarm monitoring contract for Thames Cash and Carry, Stanley CSS was able to react to an incident on site. Audio was received from the wholesaler and identified as intruders. An operator at Stanley’s ProtectionNet Customer Service Centre (PNC) alerted the police who attended the site. The keyholder discovered that one of the doors had been tampered with, suggesting the police may have interrupted a potential break in. Without the Sonitrol alarm monitoring, such a rapid response would not have been possible.

Sonitrol provides organisations with the ability to verify an alarm event in real time by allowing operators to hear what’s happening on a monitored site. When an alarm is triggered, the system immediately alerts Stanley’s PNC and transmits the sounds of the break-in attempt and a code describing the location of the activated audio sensor. Professional operators on duty around the clock listen silently to determine the nature of the noise and take appropriate action, such as calling the police or resetting the system. Such a facility increases apprehension rates as intruders are not alerted and police respond quickly to a verified crime in progress, as is likely to have been the case at Thames Cash and Carry. False alarms can also be quickly identified.

This latest Sonitrol alarm monitoring contract follows on from a number of other successful wins for Stanley CSS in the retail sector, including branches of Stearn Electric.

For sales information please contact Stanley CSS on 0844 254 0032 or via www.stanleycss.co.uk.

Via EPR Network
More Industrial press releases

CNC-Shopping Intl. Offers Brand New Fanuc Batteries For Your CNC Machine Tools, Sanyo CR17450SE-R And Panasonic BR-CCF2TH

Cnc-shopping Intl., leader in the Numerical Control Machine Tool Industry, keeps its rank of International supplier of CNC spares parts on line, for the major brands available on the market, such as Amada, Ares seiki, Charmilles, Chiron, Cincinnati Milacron, Daewoo, Deckel Maho, Doosan, Ecoca, Fagor, Fidia, General Electric, Gildemeister, Hankook, Heller, Hitachi Seiki, Hyundai, Kao fong, Kia, Kitamura, Leadwell, Mazak, Makino, Mori seiki, Miyano, Nakamura, Romi, Takisawa, Tongil, Tongtai, Toyoda, Trumpf, Victor, Washino, Yang, Yeongchin and much more… We dispose of an important stock of first hand and second hand parts at a very low price. The whole second hand material has been tested by our technicians, in order to certify you its value and reliability, we also provide you with an additional warranty to insure the quality of our products.

We offer you a large panel of articles, that are essential to the efficiency of your activity, especially for the numerical controls FANUC like CNC Machine Batteries, Servo drive, Pulse Coder/ Encoder feedback battery, PSU Battery, Battery for memory cards, Back up batttery for your CNC Machine Parameters, industrial equipment Battery, CNC Batteries replacement, Fanuc batteries, battery PLC… The PANASONIC and SANYO references as FANUC A98L-0001-0902 (Panasonic BR-CCF2TH), A98L-0031-0006 (Panasonic BR-2/3A,Sanyo CR17336SE-R), A98L-0031-0011 (Panasonic BR-AGCF2W, BR-AGCF2P), A98L-0031-0012 (Sanyo CR17450SE-R), A98L-0031-0025 (Panasonic BR-AGCT4A), A98L-0031-0026are available, and our FANUC technicians will display a high level of professionalism, dedicating their time answering any demands, in order to bring satisfaction for each customers.

Our Panasonic and Sanyo batteries match with any FANUC system 0, 3, 5, 6, 7, 10, 11,15, 16, 18, 21, Fanuc O, Fanuc 16i, Fanuc 18i, Fanuc 21i, Fanuc 30i, Fanuc 31i, Fanuc 32i, Fanuc Power mate, robot Fanuc. Since batteries have to be replaced every year, Cnc-shopping.co.uk has implemented a special department that would handle any battery order. A battery breakdown on one of your machines, would create a loss of all the production parameters, therefore we advice all our customers not to ignore that precaution, that would make them save money and time on the long term.

Furthermore, we are aware that the replacement of batteries must be done at short notice, and that is why we guarantee you an immediate availability of our team, to answer your demand, with the possibility to choose an “EXPRESS post” within 24 hours or an “economic”. We insure you, as well, the replacement “express”, which is a replacement solution of your batteries, on your Machine Park, the fixing of your machine dysfunction being done within 24 hours.

Cnc-shopping.co.uk, assure you a continuous production line, striving to do everything for you not to have to interrupt one of your machines, because we are aware of the catastrophic impact it would have. Knowing the importance of a FANUC battery, we must provide you a fast and efficient solution, to allow its replacement under any circumstances.

Cnc-shopping.co.uk acquired a reputation throughout the years, differentiating itself, thanks to its qualified technicians, highly trained engineers (20+ years experience), who will follow you throughout the entire process. Being attentive to your demand with a high responsiveness, has allowed us to impose ourselves in many industries, such as aerospace, automobile, marine, transportation, and more.

For more information on FANUC batteries, we invite you to visit our website, www.cnc-shopping.co.uk.

Via EPR Network
More
Industrial press releases

New Diagnostics Instrument for High Volume Semiconductor Manufacturing Environment

InnerSense Ltd., a leading global developer and manufacturer of precision auto-diagnostics instruments for the semiconductors industry, introduced a new system for eliminating handling-related yield loss in 300mm wafer process tools running high volume production.

The new system, coined SMW2, consists of a 300mm wafer instrumented with sensitive three dimensional vibration sensors, and a “Smart FOUP™” that serves as a recharge and communication station, as well as a clean storage container. The “Smart FOUP” employs contact-less recharging and data transfer that enable the system to interface with standard robotic wafer handlers and be operated with minimal interruption to the production line.

Yigal Tomer, InnerSense’s Co-CEO, commented, “The new system is based on six years of excursion control experience. Built on our successful Smart Wafer technology, it brings to the high volume production environment the monitoring ability that has enabled predictive maintenance and statistical analysis of tool condition, previously available in engineering mode only.”

In addition to 3D vibration sensing and FOUP-based, contact-less reader/recharger station, the SMW2 features advanced analytical tools that facilitate troubleshooting, SPC-based trend identification and tool-to-tool comparison. These tools allow even untrained operators to use the system effectively to enhance the availability of expensive wafer process equipment.

ABOUT “SMART WAFER” TECHNOLOGY
A semiconductor wafer is typically handled hundreds of times during its manufacturing process. Collisions and rubbing against other objects may result in edge cracks and back scratches. Uneven or abrupt lifting may cause skidding and misalignment, or even dropping the wafer inside the tool. Particles generated in mechanical contact cause contamination. In total, handling related defects are believed to cause over 30% of wafer yield loss.

Instrumented with sensitive multi-axial accelerometers, InnserSense’s Smart Wafer travels just like a production wafer through the entire path in the process tool and record the vibrations and tilting it experiences during the various handling operations. The recorded data is analyzed to pinpoint problem sources and detect mechanism deterioration to trigger predictive maintenance. By providing quantitative and statistical information on a regular basis, the Smart Wafer becomes a valuable tool for Advanced Equipment Control (AEC). The resulting enhanced yield and productivity translate to significant cost savings.

Via EPR Network
More
Industrial press releases

Leading Developer Of Individualized Solutions For Siphonic Roof Drainage Chooses Chicago Representative As First US Presence In The All Important Manufacturing Belt

After many successful years developing and distributing individual software solutions to plumbing manufacturers around the world, German-based Keidel Software announces a new US agent, Johannes Lenzhofer, Chicago, Illinois. Mr. Lenzhofer has a wide network of contacts, as well as years of experience representing German companies in the US.

“As a center of the manufacturing belt, Chicago is a strategic city for us” explains Rolf H. Keidel, founder of the company. “The DrainStar® Siphonic Calculator helps American roof drain and pipe manufacturers precisely calculate a planned drainage network using their own product information and relevant data. However, it also adds value to the manufacturer’s products by providing the data and drawings for construction of the drainage network that their customers can use. The manufacturer becomes a system provider that offers solutions– not just a seller of drains and pipes. This adds great value to the manufacturer’s products and brand.”

The precision of the DrainStar Siphonic Calculator software also results in cost savings of about 30% on average because the exact drainage performance of the roof runoffs is calculated. The manufacturer easily enters any product information with other key figures about the planned drainage network, and the network plan appears on the computer screen, including all the needed components. The manufacturer decides whether to create bills of material with or without prices, while the data can be converted into estimates or tender offers instantly. The network drawing can easily be transferred to CAD. All country-specific variables can also be used.

“US companies who want to take advantage of government and other incentives for ‘green’ building projects will recognize the opportunities presented by calculating siphonic drainage networks,” adds Mr. Lenzhofer. “By using a siphonic design, LEED™ points are awarded, signifying energy efficient and environmentally friendly construction practices. These points can translate into increased profitability.”

The LEED™ green building rating system encourages design and construction practices that increase profitability while reducing negative environmental impact on buildings. The environmental benefits of siphonic roof drainage are clear. Properly calculated siphonic drainage networks can result in reduced site disturbance and preparation, as well as a reduction in the use of construction materials. Pipe diameters are much smaller, the number of roof runoffs and downpipes is greatly reduced, and fewer ground lines need to be laid. These and other desired results are eligible for valuable LEED credits, and offer significant cost cutting for builders.

About Keidel Software
Keidel Software was founded in 1993 to develop and provide software solutions for the building industry around the world. Keidel Software is the market leader in Germany and has customers throughout Europe, Asia and the United States.

Contact Information Keidel US
For more information visit: http://www.keidel-software.com/us/index.php 

Via EPR Network
More 
Industrial press releases

High-Speed, Reliable, And Affordable Metrology Solutions For Every Class Of Thin-Film Photovoltaic Material Used In Today’s Industry

Filmetrics announces the launch of its thin-film photovoltaic (TFPV) dedicated measurement systems. With the release of the F10-PV and the F37-PV Filmetrics now offers commercially available tabletop and in-line metrology solutions for industries utilizing all classes of TFPV materials.

Typically built on or under transparent conductive oxides (TCO) on glass, plastics, or metal substrates, the properties of TFPV films are notoriously difficult to measure due to their special optical properties. Filmetrics has SOLVED this problem for all classes of films used in today’s industry.

The Filmetrics F10-PV and F37-PV products are capable of monitoring the film thickness of active layers such as amorphous Si, CdS, CdTe, copper-indium gallium diselenide (CIGS), TCOs, and buffer layers. These types of devices are intentionally designed to absorb rather than reflect light creating many unique challenges for performing metrology on these layers. Surmounting these challenges the F10-PV and the F37-PV can accurately measure the thickness and optical properties of even the most complex structures on TCOs adding unrivalled value in terms of production quality, efficiency, and cost control for TFPV device manufacturers.

Strong market demand, and working closely with our existing TFPV customer base, led Filmetrics to undergo extensive collaborative research in the past months to develop these products. The addition of non-destructive thin-film thickness metrology to the TFPV environment is expected to greatly enhance production efficiency and yields, help develop new processes, and facilitate rapid transfer these new ideas to the production floor.

With years of experience in the thin-film measurement field, Filmetrics provides a simple-to-understand user interface and unparalleled support. Headquartered in San Diego, CA, Filmetrics has a full line of thin-film measurement systems and is continually developing new products and technologies that bring greater efficiency to thin-film metrology. Filmetrics was founded in 1995 and has quickly established itself as the foremost innovator in the thin-film measurement industry. 

Via EPR Network
More 
Industrial press releases

Find and Buy online FANUC Monitors for Machines Tools, CRT and LCD Monitors

CNC-Shopping International, specialist of numerical control’s machine tools, keeps its rank of International supplier of CNC spares parts on line for the major Machines tools brands available on the market, such as Amada, ares seiki, Charmilles, Chiron, Cincinnati Milacron, Daewoo, Deckel Maho, Doosan, Ecoca, Fagor, Fidia, General Electric, Gildemeister, Hankook, Heller, Hitachi Seiki, Hyundai, Kao fong, Kia, Kitamura, Leadwell, Makino, Mori seiki, Miyano, Nakamura, Romi, Takisawa, TONGIL, Tongtai, TOYODA, TRUMPF, Victor, Washino, Yang, Yeongchin and much more… We place at your disposal an important stock of first hand and second hand parts on a very low price. The whole second hand material has been tested by our technicians, and in order to certify you its good quality, a warranty is also provided.

We propose you a wide range of articles essential to the efficiency of your activity, especially for the numerical controls FANUC like Brand new Cnc monitor replacement, Fanuc and GE Fanuc screens , video display units of cnc controls,including mono green, amber, colour, industrial monitors, with connector HD15, DB9, BNC, HE10, HE16. FANUC Monitors for FANUC system 0, 3, 5, 6, 7, 10, 11, 12, 15, 16, 18, 20, 21, Fanuc O, Fanuc 16i, Fanuc18i, Fanuc21i, Fanuc 30i, Fanuc 31i, Fanuc 32i, Fanuc Power mate, robot Fanuc.

You can buy online anywhere in the World and at anytime the following Fanuc Brand new monitors references at the cheapest price, these models are always in Europe stock, ready to ship under 24h : A61L-0001-0092 , A61L-0001-0093, A61L-0001-0072, A61L-0001-0076, A61L-0001-0079, A61L-0001-0086.

Check Online the availability of the other references A61L-0001-0073, A61L-0001-0074, A61L-0001-0077, A61L-0001-0078, A61L-0001-0087, A61L-0001-0091, A61L-0001-0094, A61L-0001-0095, A61L-0001-0096, A61L-0001-0142, A61L-0001-0154, A61L-0001-0168, A61L-0001-0176, A61L-0001-0179, A61L-0001-0187, A61L-0001-0193 on Cnc-shopping.com, assure you a continuous production line, everything is done for you not to have to interrupt one of your machines, because we are aware of the catastrophic impact it would have, and knowing the importance of a monitor, we must provide you a fast and efficient solution.

Cnc-sopping.com differentiates itself thanks to its qualified technicians who will follow you throughout the entire process, being attentive to your demand with a high responsiveness has allowed us to impose ourselves in the Industry, Medical, and the Marine sectors.

To satisfy your needs and wants, we guaranty you an immediate availability of our products, which are spread in our different stock locations, enabling us to send you the most rapidly possible your order, you will be able therefore to choose a shipment Express within 24hours or economic. We insure you, as well, the replacement ‘express’, which is a replacement solution of your monitors, on your Machine Park, we will fix the dysfunction of your machines within 24 hours. For further information about our Fanuc monitors, visit our Fanuc monitors categorie.

Find and Buy online your FANUC Monitors of your Machines Tools, CRT and LCD Monitors (9 inch, 12 inch, 14 inch…) majors models are A61L-0001-0092, A61L-0001-0093, A61L-0001-0086 and much more…

Via EPR Network
More Chemicals press releases

Cnc-Shopping Remains The European And International Leader In Providing A Wide Variety Of Brand New And Second Hand Cnc Parts

Supplier of Cnc Machine-tools spares parts, Fanuc, Indramat, Num, Fuji Electric.

CNC-Shopping headquarter located in Paris, FRANCE is specialized in CNC machine tools industry. In this sector and in order to answer to your expectations, we have created our International Online store website www.cnc-shopping.co.uk to satisfy your requirements in the supply of CNC spares parts.

Therefore, Cnc-Shopping remains the European and International leader in providing brands such as FANUC – NUM 750 – 760 – INDRAMAT – HEIDENHAIN – SIEMENS – FUJI ELECTRIC Transistors – MITSUBISHI ELECTRIC and much more… the latest news and also a wide variety of brand new and second hand Cnc parts. Those are very high quality products and still have their place on the second hand market to block your immediate wants and needs in delivery, – Express – or – Economy – for products whose are electronic boards (axis board, drive board, memory board), power supplies, servo drives, servo motors, handwheels, replacement monitors for CNC operator panels, and that is the reason why CNC Shopping is, now one of the International leaders in the supply online of Industry.

We also have a dedicated FANUC Technical dpt, offering a large stock of FANUC Spares parts and Technical assistance for Fanuc Alpha power supplyFanuc DrivesFanuc Graphic boardsFanuc HandwheelsFanuc KeyboardFanuc Master boardFanuc Membranes,Fanuc Memory boardsFanuc MonitorsFanuc MotorsFanuc Operator panelsFanuc Spares partsFanuc Power supply unitFanuc Pulse coderFanuc Spindle driveFanuc Spindle pcbFanuc FanFanuc Batteries.To assist you in your daily life, face your challenges, providing the energy needed in a constantly changing world is our goal because being able to adapt ourself is, more than ever, synonymous with performance, in an environment which is becoming more and more demanding. We invite you to visit our website, check online prices and stock availability.

We consider your expectations as primary and we want you to trust CNC-Shopping in each decision making, we commit ourself to prove you that CNC Shopping is the right choice to make.

Via EPR Network
More Industrial press releases

The new T-LSR series of computer controlled motorized linear stages extend the range of Zaber’s extensive line of stepper motor based motion control devices

Zaber Technologies has recently announced the launch of its T-LSR series of computer controlled motorized linear stages. These stages extend the range of Zaber’s line of precision motion control products offering travel up to 300mm with resolution down to 0.25 um. Zaber’s fastest and strongest stages, the T-LSR series can handle loads up to 20kg at speeds up to 20mm/s.

Multiple T-LSR stages may be mounted in x-y or x-y-z configurations without any additional hardware. They are also compatible with Zaber’s T-LS series of precision motorized ball bearing stages which offer higher resolution over shorter travel.

Integrated motors and controllers allow T-LSR stages to be daisy chained with all other T-series products and controlled from a single USB or RS232 serial port. Demo control software for a variety of programming environments is available for free download from the Zaber website.

A knob at the end of each T-LSR units permits smooth manual control. For manual operation, the stage need not be connected to a computer. However, if connected to a computer, stage position can be tracked and displayed during a manual move. T-LSR stages may also be controlled by Zaber’s T-JOY series of programmable 3 axis joysticks.

For more information on the T-LSR and compatible products please visit the links below:

T-LSR Motorized Linear Stages


Via EPR Network
More Industrial press releases

Welcome to EPR Industrial News

EPR Industrial News is a new blog, part of EPR Network, that is going to be focused on and will be covering the industrial news and stories from press releases published on EPR Network.

EPR Network (EPR stands for express press release) is one of the nation’s largest press release distribution networks on Web. The EPR’s nationwide network includes 12 State based PR sites, one major PR forum and a number of industry specific PR blogs and what started as a hobby on Internet years ago turned out to be a rapidly growing business today. EPR Network is also known as one of the most trusted (human optimized, published, edited and monitored, spam/scam/low quality PR content free) PR sites on the web with more than 10,000 company and individual press releases distributed per month. EPR Network is putting your press releases on top of all major search engines’ results and is reaching thousands of individuals, companies, PR specialists, media professionals, bloggers and journalists every day.

EPR Network has thousands of clients around the world including global 500 corporations like Hilton Hotels, Barclays Bank, AXA Insurance, Tesco UK, eBay/Skype, Emirates, just to name a few. The network’s PR web sites are currently reaching from 150,000 to sometimes 500,000 unique visitors per month while our viral reach could possibly go to as much as 1M people per month through our presence across various social media sites. EPR Network was established in 2004 and as of May 2008 it had more than 800,000 press releases (pages) published on its network.

If you have a press release to be distributed, you can do it over here: press release distribution